Interior Cleaning; Condenser Cleaning - Maxx Ice MIM50 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Interior cleaning

The ice storage bin should be sanitized occasionally. Clean the water trough before the ice
maker is used first time and reused after stopping for an extended period of time. It is usually
convenient to sanitize the trough after the ice making system has been cleaned, and the ice
storage bin is empty.
1. Disconnect the power to the unit.
2. Open the door and take out the removable ice storage bin. With a clean cloth, wipe down the
interior of unit and ice bin with a sanitizing solution made of 1 ounce of household bleach or
chlorine and 2 gallons of hot (95ºF – 115ºF) water.
3. Rinse thoroughly with clear water.
4. Screw off the drainage nut to drain completely.
5. Put the ice storage bin inside the unit.
6. Reconnect power to the unit.
The ice scoop should be washed regularly. Wash it just like any other food container.
DO NOT use solvent-based cleaning agents or abrasives on the
interior. These cleaners may transmit taste to the ice cubes and
damage or discolor the interior.

Condenser cleaning

A dirty or clogged condenser prevents proper airflow, reduces ice making capacity, and causes
higher than recommended operating temperatures that may lead to component failure. Have the
condenser cleaned at least once every six months.
1. Unplug the ice maker or disconnect power.
2. Gently pull off the lower front louver.
3. Remove dirt and lint from the condenser and the
unit compartment with the brush attachment of a
vacuum cleaner.
4. Reassemble the lower front louver.
5. Plug in the ice maker or reconnect power.
Water distribution tube cleaning
When you find the ice cubes are incompletely formed or the output is low, the water distribution
tube may be blocked. Turn off the power button, gently take out the water distribution tube, locate
the holes in the distribution tube and use a pointed object such as a toothpick to dredge the holes.
Then put the water distribution tube back to its original position. If the tube is badly blocked, clean
it as follows:
1. Shut off the water supply
2. Disconnect the water hose from the distribution tube.
C o n d e n s e r
S u r f a c e
19
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Mim50-o

Tabla de contenido