Main Components - SOLAC CE4493 Instrucciones De Uso

ENGlIsH
de of the appliance used for protection during
transport or for sales promotions, such as pa-
per or plastic bags, plastic sheets, cardboard
and stickers.
Make sure that there is water in the tank, be-
•
fore connecting the coffee maker.
Do not touch the appliance with wet hands
•
when in operation.
Do not use the appliance on wet surfaces or
•
outdoors.
The appliance must be connected to a power
•
socket with a suitable ground connection.
Do not release the filter holder while coffee is
•
coming out.
Steam and water may sometimes emerge
•
from the coffee outlet. This is not a sign of a
fault or malfunction.
This espresso coffee maker is a high pressure
•
model (up to 19 bar) and has a built-in electric
pump to draw out the maximum flavour and
aroma from the coffee. It is therefore normal
for the electric pump to make a little noise and
vibrate when it comes into operation.

MaIN CoMpoNENTs

1 on/ff switch
2 Network indicator lamp
3 Temperature indicator lamp
4 Temperature selector (coffee/steam)
5 Coffee/steam brewing
6 Filter holder
7 Capsule filter
8 Two cup filter
9 Measuring scoop with compactor
10 Coffee outlet holes
11 Steam nozzle
12 Steam nozzle protector
13 Filter holder guide
14 Water tank
15 Cup holder tray
16 Tray grille
17 Container lid
18 Drip tray
TIps
Before using the coffee machine for the first
•
time, we recommend allowing the equivalent
of 8-10 cups of water to run through the filter
holder (with no coffee in the filter). This com-
pletely cleans the entire system.
Getting the right espresso for every user's tas-
•
te is a result of the type of coffee, the dose
CE4493_cafetera.indd 10
and the pressing:
We recommend you choose your preferred
•
coffee blend, one with a fine grind especially
for espresso.
The result will vary considerably according
•
to the quantity of coffee used. If you want a
strong coffee, you can exceed the dispenser
spoon amount and fill the filter holder to the
top.
Finally, we recommend that you press the
•
coffee to extract all the coffee essences and
improve the cream.
Coffee should always come out of the filter
•
holder in a regular stream, without dripping. If
not, both the quantity of coffee and the pres-
sing should be reduced or the coffee grind
adjusted.
We recommend that you make the coffee as
•
soon as the indicator light turns blue to ensure
a higher temperature.
sERvICE:
Any misuse or failure to follow the instructions
•
for use renders the guarantee and the manu-
facturer's liability null and void.
UsE
CoFFEE
Initial use
The boiler may come empty from the factory. Fill
the boiler for initial use of the coffee maker. With
the coffee maker cold, perform a system refill cy-
cle. To do this:
1 Fill the tank with cold water. The tank (14) can
be removed via the back of the coffee maker
or open the lid (17) and pour the water in di-
rectly.
2 Plug the appliance into the mains and switch
it on using the on/off switch (1) The indicator
lamp (2) will light up red.
3 Make sure the temperature selector (coffee/
steam) (4) is in "coffee position. Turn the
brewing selector (5), to "coffee" position. The
pump will start operating. In a few seconds,
water will start to come out from coffee outlet.
That means the machine is ready to start.
start
1 Fill the tank with cold water. The tank (14) can
be removed via the back of the coffee maker
or open the lid (17) and pour the water in di-
rectly.
2 Plug the appliance into the mains. The indica-
EN
13/4/16 16:06