Idiomas disponibles
Idiomas disponibles
get ready
Unpack the boxes
Box 1
Chair base
Hardware
Power supply and cord
ASSEMBLE THE CHAIR
Install the backrest
1. Tip the chair base forward onto the front of the base (Fig.1).
relaxtheback.com
Box 2
Backrest
Head pillow
Fig.1
4
Your Relax The Back zero gravity recliner requires some simple assembly.
Just attach the backrest to the chair base, connect the hoses and cables,
place the head pillow and remote, and you're done!
2. Place the backrest in front of the chair base, then feed the
backrest cables and hoses between the seat cushion and
the backrest mounting frame (Fig.2).
3. Place the backrest face-down on the back of the chair
base (Fig.3).
4. While supporting the backrest, align the four holes on the
backrest mounting plate with the corresponding posts on
the chair base, then press the mounting plate firmly onto
the posts (Fig.3).
5. Install a washer onto each screw, then install the four
screws to secure the backrest (Fig.3).
Cables and hoses
Fig.2
Backrest
Fig.3
5
5
