MAST M.2x Serie Manual De Instrucciones página 31

Idiomas disponibles

Front wheels installation/removal

Installation: insert the front wheels' pin into the fra-

me's front connections. It is necessary to push until

you hear a "click": this means that the wheel has

been properly attached. Pull on them in the oppo-

site direction to make sure the wheels are correctly

installed.

Removal: press the side button on the front connec-

tions, and meanwhile pull on the wheel to remove it.

Release / Lock front wheel

Push right the swivel lock to release the front wheel.

Push left the swivel lock to lock the front wheel in a

fixed position.

Rear wheel installation/removal

Installation: Insert the rear wheel into the rear

wheel bracket. Push until you hear a "click": this

indicates that the wheel is correctly installed.

Press the red button and then pull the wheel out to

remove.

Front bar installation/removal

Installation: Insert the protective bar into the

frame in the direction of the arrow. Push the bar

until you hear a "click" indicating that the bar has

been correctly assembled.

Unfolding: Press one of the two central buttons on

each side of the frame to release the rear bar.

Removal: Press the two buttons on each side

of the frame, then raise the bar in the direction of

the arrow.

WARNING:

pushchair when there is a baby in the seat!

M.2x MAST_manual. D_IT_EN_FR_ES. 15.06.2023.indd 31

Never hold the front bar to lift up the

OPERATION

15.06.2023 11:08:30

Ma-m2x