Idiomas disponibles
Idiomas disponibles
14) Any unit used for polymerization,
including the Mini L.E.D., must not be
used on, or by, any person who
suffers, or has suffered in the past,
from
photo-biological
(including
urticaria
protoporphyrie
erythropetique),
any
person
receiving
treatment and using photosensitive
medication (including methoxsalenes
or dymethylchlorotetracycline).
15) Any
person
who
suffered from a retina or crystalline
condition or who has undergone eye
surgery,
in
particular
treatment,
should
specialist before using the unit or
before undergoing treatment with the
unit.
Even
with
agreement, great care should be taken
because the intensity of the light is
potentially dangerous. It is highly
recommended to use protective ultra-
violet and light-filtering glasses at all
times.
16) Any variation in the voltage of the
power
supply
or
electromagnetic
field
normal safety regulations could cause
the unit to come on automatically, or
interfere with its operation.
17) Electromagnetic interference: the unit
has been tested and approved for all
the current standards (EN 60 601-1-2)
both
with
regard
(electrical
field
rays
voltage interference) and immunity
(electrical fields rays, intermittent
bursts on the supply, electrostatic
discharges and supply shock waves).
18) If required, your dealer can supply all
spare parts, in particular the battery,
which should be returned to them.
19) For use only by a dental professional.
2 – PRESENTATION
The Mini L.E.D. produces a visible blue
light between a wavelength of 420 and
reactions
480nm for the photo-polymerization of
solaris
or
dental
or
packaging for damage (please retain the
medical
packaging), you will find the following:
1-
2-
has
previously
3-
4-
cataract
5-
visit
an
eye
6-
7-
the
patient's
8-
3 – INSTALLATION
1)
in
the
2)
outside
the
3)
to
emission
and
supply
4)
5)
6)
5
materials.
After
checking
The
Mini
L.E.D.
incorporating
the
Light
Diode.
The base station for recharging the
unit incorporating a radiometer.
The mains adapter and mains socket.
The Lithium Ion battery.
A curved universal Light Guide of
Ø7,5mm which can be sterilized.
A deflector
Booster tip (optional)
User's manual.
Check that environmental conditions
are
satisfactory
(i.e.
temperature
between 15°C and 30°C and humidity
between 10% and 80%).
Prior to each use, sterilize the light
guide and disinfect both base station
and handpiece (see also the chapter
on care).
Screw the battery onto the handpiece,
remove the protection cap and place
the sterilized light guide in the
handpiece. Ensure that the light guide
is inserted correctly. There is a
friction contact with a click.
Position the base station on a sturdy
surface. Plug in the mains adapter and
ensure that the plug is suitable for the
voltage of your power supply. The
green light will flash twice.
Place the handpiece in the base
station for a minimum of 2 hours 30
minutes in order to fully charge the
battery.
The
green
light
starts
indicating that the battery is being
charged. As soon as the battery is fully
charged, the light stops flashing and
stays lit.
the
handpiece
Emitting
to
flash
