Tabla de contenido
Idiomas disponibles
Idiomas disponibles
START-UP
• Open all valves and connect the motor.
5. MAINTENANCE.
• If the pump stops, check that the motor amp consumption during its operation
is the same or less than that indicated on the manufacturer's specification label,
otherwise, contact the nearest Customer Technical Service.
• If the amp rate is higher, consult the manufacturer.
• Empty the pump in the cases where it must remain without use for some time,
mainly in cold countries where there may be danger of freezing.
• To empty the pump, remove the draining plug from the pump body. (see explosion
drawing)
6. DISASSEMBLY.
• The motor unit may be dismantled from the pump body without needing to
disconnect the pump's suction and impulsion tubing.
• To disconnect the motor unit from the pump body, remove the screws (see
explosion drawing).
25
Tabla de contenido
