Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ELECTRICAL UNIT
• The electrical unit should have a multiple separation system with contacts opening
of at least 3 mm.
• Connection to the mains can only be done by using a rigid cable. In the event that
a flexible cable is used, this should have terminals to be connected to the pump
motor.
• The electrical connection of the pump must be done by means of a magneto-
thermical protection.
• A protection differential of 0.03 A is needed for any pump in order to protect it
from electrical leaks (shown in diagrams).
CONEXIONES ELÉCTRICAS - ELECTRICAL CONNECTIONS
BRANCHEMENTS ELÉCTRIQUES - ELEKTRISCHE ANSCHLÜSSE
22
Tabla de contenido
