POLTI Vaporetto SV660 Style Manual De Instrucciones página 23

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
• Only pour water or the water mix indicated in the "WHICH
WATER TO USE" Chapter into the tank.
• Do not aim the steam jet at toxic substances, acids, solvents,
detergents or corrosive substances.
• Do not aim the steam jet at explosive powders or liquids, hy-
drocarbons, flames and/or incandescent objects.
• Handle and remove dangerous substances according to the
indications provided by their manufacturers.
• Do not position the product near sources of heat such as fire-
places, stoves and ovens.
• Do not position the product near electromagnetic fields such
as the induction plate.
• Re-wind the cord when the appliance is not in use.
• Do not obstruct the openings and grills on the product.
• Do not attempt to use the steam jet on any part of a human or
animal's body.
• Do not direct the steam jet on clothes while they are being
worn.
• Cloths and rags and fabrics which have been subjected to a
deep steam reach very high temperatures, above 100°C. Wait
a few minutes and check that they have cooled before han-
dling them. Therefore, avoid contact with the skin if they have
just been steamed.
• Before steam treating surfaces (wood or laminate floors, car-
pets, rugs, leather and fabrics and any surfaces especially
those that are delicate or treated), consult the surface man-
ufacturer's or the supplier/installer's instructions and always
perform a test on a section that is out of view or on a sample.
Allow the steamed surface to dry to ensure that there is no
deterioration, change of colour or deformation and that the
surface stands up to the temperature of the steam.
23
loading