CICLOSPORT Ciclo PULPS CP 13is Manual Del Usuario página 37

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 76
9. tROUBLesHOOtInG
no display of values, or meaningless values
• Check battery
Black display or display is very slow
• Temperature is too high (above 50°C)
• Display was exposed to direct sunlight for too long
• Temperature is too low (below 0°C)
signal tones at regular intervals
• Check if heart rate alarm is switched on
no heart rate displayed or values displayed are
incorrect or unstable
• Receiver is not connected: press desired button
• Check transmitter belt
• Skin too dry or cold
• Distance between CICLOPULS CP13is and transmitter
belt is too great (it should not be more than 70 cm)
• Interference due, for example, to high voltage electricity
pylons, other heart rate monitors, mobile phones, etc.
The display will return to normal outside the field of inter-
ference.
All manuals and user guides at all-guides.com
10. COnDItIOns OF WARRAnty
A 24-month warranty is given with the CP13is.
The warranty is limited to faulty materials and poor
workmanship. The batteries and parts subject to wear are
excluded from the warranty.
The warranty is only valid if the CICLOPULS CP13is has
been used with due care and in accordance with the
instructions.
In the case of a claim under the warranty, either contact
the dealer or local distributor, or post the CICLOPULS
CP13is together with the sales receipt (showing the date
of purchase) and all fittings, with sufficient postage, to the
following address:
CicloSport Service
K. W. Hochschorner GmbH
Einsteinstr. 39a
D-82152 Martinsried
www.ciclosport.de
37
loading