f)
CAUTION! Failure to seal the elements on the fan will lead to air leakage and
therefore improper ventilation circulation!
g) The device prepared in this way should be installed in the place of service as
desired by the user. Fasten it to the working surface with mounting screws in
accordance with the distance of the holes of the connection plates. Mounting the
device onto the work surface should be performed in accordance with the
standards and regulations prevailing in a given country.
h) Connect the device to the power supply.
3.4. Cleaning and maintenance
a)
Pull the mains plug and let the unit cool down completely before cleaning,
adjusting or replacing accessories and when the unit is not in use.
Wait until the rotating parts stop.
•
b)
Use only non-corrosive cleaning agents for cleaning the surfaces.
c)
After each cleaning, all the parts should be dried well before the unit is used
again.
d)
Store the unit in a dry and cool place protected from moisture and direct
sunlight.
e)
Do not spray the unit with a stream of water or immerse it in water.
f)
Perform regular inspections of the unit, checking technical fitness and any
damages.
g)
Use a soft cloth for cleaning.
h)
Do not use sharp and/or metal objects (e.g. a wire brush or metal spatula) as
these may damage the surface of the appliance material.
i)
Do not clean the unit with acidic substances, medical products, diluents, fuel,
oil or other chemicals as this may cause damage to the device.
DISPOSAL OF USED UNITS.
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the
product, operating instructions or packaging. The materials used in this appliance
are recyclable according to their marking. By reuse, recycling or applying other
forms of use of waste machines, you make a significant contribution to the
protection of our environment.
Your local administration will provide you with information about the appropriate
disposal point for used appliances.