GYS Tool it EXPERT 9 Manual De Instrucciones página 7

Translation of the original instructions
The welding mask must be moved carefully to avoid damage to the
filter, guards and/or protective shell.
Maintenance :
- Do not place heavy objects or tools on or in the facepiece to
avoid damage to the filter or face shields.
Mask storage temperatures range from -10°C to +60°C.
- Clean the Optoelectronic Filter with a clean cotton or special
lens cloth.
- Regularly clean and change the guard screens.
- Clean the inside and outside of the mask with a neutral
detergent-disinfectant. Do not use solvents.
- Make sure that the sensors and cell are not obstructed by dust or
debris.
- We recommend using the mask and visors for 5 years. The length
of use depends on various factors such as type of use, cleaning,
storage and maintenance.
BEFORE WELDING
-Check that the welding helmet is in good condition and headband adjustment.
-Check whether the front cover lens, the front frame and filter are inserted and fixed in place. In case of anomalie, please proceed to its
reconditionning.
-Make sure that the 2 sensors and the cell are not obstructed by dust or debris.
-Make sure that the protection films on both screens are removed.
-Check that the protection level matches your welding processes. Please refer to the following chart to help your choice (cf. welding process
board)
OPERATION
The EXPERT 9/13G auto-darkening welding helmet switches from light to dark state when a welding arc is struck. The auto-darkening
welding helmet switches back to the light state when the arc stops.
1 2
7
3
PRECAUTIONS
• The welding helmet is suitable for use with virtually all welding processes except Oxy-Acetylene welding, laser welding and gas welding.
• Standard protective screens must be installed on both inside and outside surfaces of the module. Failure to use protective screens may
constitute a safety hazard or result in irreparable damage to the module.
Clear shade 4
Dark shade 9-13
Filter dimension 110 x 90 mm
Reaction speed 0,3 ms
Power supply Solar + batteries
Weight
540 gr
Field of vision
98x43mm
Applications
MMA 5>400A / TIG 5>300A / MIG-MAG 5>400A / Grind
Warranty 2 years
Application temperature -5°C / + 55°C
Storage temperature -10°C / + 60°C
HEADBAND ADJUSTMENT
The EXPERT 9/13G is equipped with a headband which can be adjsuted in multiple ways to suit the welder: width, height (1), longitudi-
nal inclination (3) and adjustment (2).
EXPERT 9/13G
1. Sensitivity control knob
4
2. Delay time control knob
3. LCD protection plate
7
6 4. Solar cell
5. Filter
5
6. Sensors
7. Potentionmeter «Welding-Grinding»
7
EN