Idiomas disponibles
Idiomas disponibles
C
F
A
AMERA
UNCTIONS
ND
H
J
ATW
BLC
NAGC
r=.45
LINE LOCK
L
K
ATW
BLC
NAGC
r=.45
M
LINE LOCK
Some features may vary depending on the model. All measurements are in mm
A.
C (CS) mount adapter
If using a CS lens, remove the C mount ring.
B.
Back focus adjustment.
Unscrew the Back Focus locking screw. Turn the ring to
optimise focus. (B&D)
C.
Camera mounting points.
Standard photographic pan-head bolt with a 1/4" BSW or 20
UNC thread.
D.
Back focus adjustment locking screw (B&D)
E.
Auto-iris and direct drive lens connector (MINI JACK).
See section "Auto-iris lens connector" below
F.
Red power LED
G.
Monitor output socket (BNC).
Second video output connection (1V peak to peak)
H.
Lens mode switch
DD
VD
AES
DD:
For direct drive lenses
VD:
For video drive auto-iris lenses
AES:
For fixed/manual iris lenses
I.
DC level adjustment.
When using a direct drive (DD) lens, adjust the lens level
potentiometer to obtain the correct light exposure.
S
WITCHES
G
F
AWB
BLCOFF
DD
SUPERAGC
VD
r=1
AES
INT
NC
DD LEVEL
POWER
I
PHASE
MONI. OUT
AWB
BLCOFF
DD
SUPERAGC
VD
r=1
AES
INT
NC
DD LEVEL
POWER
S-VIDEO
VIDEO OUT
O
N
A
C
D
E
J.
SW1
ATW
BLC
N AGC
r=.45
LINE LOCK
Auto Tracking White Balance
Auto Backlight Compensation ON/OFF
Normal AGC / Super AGC
GAMMA 0.45 / 1 (default 0.45)
Line-Lock / Internal sync
No connection
Conventional auto white balance
K.
External synchronised phase adjusting button
to adjust line-lock phase (Line-lock model). See
figure on right.
L.
AC85V~265V power cord
M.
DC 12V or AC24V/DC12V terminal block
N.
Video output socket (BNC)
Main video output connection (1 Vpeak-to- peak)
O.
Y/C output S-terminal
For Y/C output connection
Y: 1 Vp-p and C: 0.3 Vp-p at 75 Ohm load
B
AWB
BLCOFF
SUPERAGC
r= 1
INT
NC
0
1
3
