Idiomas disponibles
Idiomas disponibles
EN
8.1
UNPACK THE MACHINE
Make sure that you correctly assemble the machine before
use.
•
If parts of the machine are damaged, do not use the
machine.
•
If parts are missing, do not operate the machine.
•
If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
For your personal safety, do not insert battery before the
tool is assembled completely.
8.2
ATTACH THE GUARD
Do not touch the cut-off blade.
1. Remove the screws from the trimmer head with the
supplied hex wrench.
2. Put the guard onto the trimmer head.
3. Align the screw holes on the guard with the screw holes
on the trimmer head.
4. Tighten the screws with the supplied hex wrench.
8.3
ATTACH THE BIKE HANDLE
1. Loosen the central knob (A).
2. Remove the cap (B) and the lower support (C) .
WARNING
WARNING
WARNING
WARNING
English
Do not miss the spring in the support.
3. Put the bike handle (4) in the lower support (C).
4. Put the cap (B) on the lower support.
5. Put the entire block in its housing on the shaft.
6. Set the auxiliary handle in the comfortable position.
7. Lock the auxiliary handle with the central knob.
C
8.4
ATTACH THE SHOULDER STRAP
1. Attach the carabiner to the carrying ring on the drive
tube.
8
NOTE
A
B
①
②
