Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
While the fountain is designed to operate as splash free as possible, some water splashing
out of the fountain is inevitable. Place the fountain in a location where any splashing will not
cause damage. Always keep the fountain working with sufficient water and clean of debris
and dirt to ensure proper functioning of the pump.
Operating Fountain
ALWAYS MAKE SURE THE PUMP IS FULLY SUBMERGED UNDER THE WATERLINE
PRIOR TO TURNING PUMP ON.
1. Check that there is enough water in the reservoir.
2. Plug in the pump cord into outlet and switch on, the pump will start to work.
3. The water flow rate can be increased or decreased by moving the flow rate controller on
the water pump to the +/- signs.
4. Turn off power outlet switch, the pump will stop working.
5. Unplug fountain from outlet if not in use for a long period of time.
Adjust the flow rate to achieve the desired effect and to minimize any splashing. Splashing can
occur if the flow rate is too high or the reservoir is too full. The flow rate can be increased or
decreased by moving the flow rate control switch towards the '+/max' or '-/min' positions.
Note:
1. Drain the water if you don't plan to use the fountain for a long time to prevent mosquito
breeding and water odor.
2. Be sure to drain all water during winter months or cold seasons to prevent reservoir from
cracking or breaking.
CARE AND MAINTENANCE
•
If necessary, clean the fountain with a soft cloth and change the water frequently. Due to
water evaporation, you may see a buildup of white residue on the fountain surface from
mineral content in the water supply. To prevent such buildup, regularly clean the fountain
with soap and water. Do not use any abrasive cleaners, which may damage the applied
finish.
•
Use of water clarifier or algaecide of any kind will damage the paint on the fountain and will
not be covered under the manufacturer's warranty.
WARNING: Please check and
ensure the power cord is not damaged
before using this appliance
7
