SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
This product must be installed in accordance with all applicable installation codes.
WARNING
• Be sure power is off at main power panel/fuse box before installing or replacing fixture. This product
must be installed in accordance with the applicable installation codes by a person familiar with the
construction and operation of the product and the hazards involved.
• If you are not familiar with electrical wiring, it is recommended that you secure the services of a
well-qualified electrician who can assure that this installation meets local, state, and national codes.
1
1. Place wall switch in OFF position. If fixture has built-in switch or chain pull, switch or pull chain so
fixture is OFF.
2. Next, if the main fuse box has an ON/OFF switch, place main power switch in OFF position.
3. For screw-in type fuses, unscrew fuse or fuses that control the power to the fixture or room.
• Before installing this fixture, be sure to check with local ordinances regarding approved outdoor
lighting. This fixture style may not be allowed in some areas.
• This fixture is for outdoor use only.
• This fixture should be mounted to a grounded junction box marked for use in wet locations.
• The electrical system and the method of connecting this unit to the system must be in accordance
with local, state and national electric codes.
• This product is to be connected to an AC 120 volt, 60 Hz power source. Connecting to a different
power source or wired incorrectly may create a hazard, damage the unit, and will void the warranty.
• This fixture is suitable for wet locations.
• DO NOT use around flammable/combustible material or liquids.
• When replacing the lamp (bulb), only use a type A medium base lamp (bulb) – 60 watt maximum.
Never use a lamp (bulb) with a higher wattage than the stated maximum allowed on the fixture.
Using a higher wattage lamp (bulb) may cause a fire hazard and/or damage the unit.
2
3
3
Lowes.com/portfolio
2