26 OPERATION
NOTE
• Cycle time may vary depending on the soil level of your load.
•
: Control Lock
CL
- The Control Lock feature helps prevent settings from being changed during a cycle. Selecting this
feature locks all of the buttons, except for the Power button, on the control panel. This feature
does not lock the door.
- While a cycle is running, press and hold Half Load and Energy Saver simultaneously for three
seconds to activate or deactivate Control Lock.
- To start a new cycle, deactivate Control Lock.
•
: Wi-Fi
f
- When the appliance is connected to the internet through a home Wi-Fi network, this icon
illuminates.
- Press and hold Delay Start for approximately three seconds to connect to the network.
•
: Night Dry
m
- This indicator lights up when Night Dry is selected.
Chime On/Off Button
c
• To activate or deactivate the button sounds, press and hold Dual Zone and Energy Saver
simultaneously for three seconds. The error alert sound cannot be turned off.
Cancel Button
d
• The drain pump activates and the cycle cancels. Once the dishwasher finishes draining, the power
turns off.
• Press and hold Start for three seconds to activate.
Start Button
e
• To operate the machine, either press Start and close the door within four seconds or close the door
and press Start.
• An alert will sound when the door is not closed within 4 seconds after you press Start button.
Wash Cycles
Select your desired cycle.
Auto
This cycle senses the soil amount and soil
toughness and is optimized to achieve the best
cleaning.
Heavy
This cycle is for heavily soiled dishes and dishes
with hardened on soil. This cycle defaults to the
strongest spray intensity and uses it to wash
heavily soiled dishes.
Delicate
Use this cycle to clean delicate items such as fine
china and stemware.
Normal
This cycle is for daily, regular, or typical use to
completely wash a full load of normally soiled
dishes. The energy usage label is based on this
cycle without any options. Select the Night Dry
option if leaving dishes overnight. Press and hold
Extra Dry for three seconds to activate Night Dry.
• After the cycle ends, the fan runs for an hour to
help vent the warm, moist air in the tub. You can
stop the fan by opening the door after the cycle
ends.