Idiomas disponibles
Idiomas disponibles
NOTE
• If the appliance is having trouble connecting
to the Wi-Fi network, it may be too far from
the router. Purchase a Wi-Fi repeater (range
extender) to improve the Wi-Fi signal
strength.
• The Wi-Fi connection may not connect or
may be interrupted because of the home
network environment.
• The network connection may not work
properly depending on the Internet service
provider.
• The surrounding wireless environment can
make the wireless network service run slowly.
• The appliance cannot be registered due to
problems with the wireless signal
transmission. Unplug the appliance and wait
about a minute before trying again.
• If the firewall on your wireless router is
enabled, disable the firewall or add an
exception to it.
• The wireless network name (SSID) should be
a combination of English letters and numbers.
(Do not use special characters.)
• Smartphone user interface (UI) may vary
depending on the mobile operating system
(OS) and the manufacturer.
• If the security protocol of the router is set to
WEP, you may fail to set up the network.
Please change it to other security protocols
(WPA2 is recommended) and register the
product again.
Installing the LG ThinQ
Application
Search for the LG ThinQ application from the
Google Play Store or Apple App Store on a
smartphone. Follow instructions to download
and install the application.
Using the Appliance Remotely
Início Remoto (Remote Start)
Use a smartphone to control your appliance
remotely. You can also monitor your cycle
operation so you know how much time is left in
the cycle.
Using this function
1
Put the laundry into the drum and add
detergent into the detergent dispenser
drawer.
• If desired, add bleach or fabric softener to
the appropriate areas of the dispenser.
2
Press the ENCENDIDO/APAGADO button.
3
Press and hold Início Remoto button for 3
seconds to enable the remote control
function.
4
Start a cycle from the LG ThinQ
application on your smartphone.
NOTE
• Once this function is enabled, you can only
start a cycle from the LG ThinQ smartphone
application. If the cycle is not started, the
appliance will wait to start the cycle until it is
turned off remotely from the application or this
function is disabled.
• If the door has been opened, you can not
start a cycle remotely.
Disable this function manually
When this function is activated, press and hold
the Início Remoto button for 3 seconds.
Descarga de Ciclo (Download Cycle)
You can download new and special cycles that
are not included in the basic cycles on the
appliance. Appliances that have been
successfully registered can download a variety
of specialty cycles specific to the appliance.
Once cycle download is completed in the
appliance, the product keeps the downloaded
cycle until a new cycle is downloaded.
EN
31
