Idiomas disponibles
Idiomas disponibles
B. Install the Oven
ADJUST SCREW
1. Fix ADJSUT SCREW on the UPPER AIR TUNNEL of the oven, and then
install the oven into the cabinet.
Adjust the height of ADJUST SCREW to keep 1mm gap between the
ADJUST SCREW and the top plane of cabinet.
Do not trap or kink the power cord.
Make sure that the oven is installed in the center of the cabinet.
2. Open the door; fix the oven to the cabinet with SCREW
INSTALLATION HOLE of TRIM KIT. Then fix the TRIM-KIT PLASTIC COVER
to the INSTALLATION HOLE.
UPPER AIR TUNNEL
TRIM-KIT
SCREW B
EN-14
ADJUST HEIGHT
ADJUST SCREW
TRIM KIT
B
at the
