Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble or install the product.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with the package and hardware contents list. If any part is missing
or damaged, do not attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (not included): Phillips Screwdriver, Flat Head Screwdriver, Power Drill, 1/4" Drill Bit, Pencil, Level
Installation may vary depending on how the previous bath accessory was installed. Supplies necessary for the installation of the bath accessory are not
all included; however, they are available wherever home improvement supplies are sold.
INSTALLATION INSTRUCTIONS
1. Unscrew the set screws (E) at
the base of each mounting post.
Remove the mounting screws (C)
and mounting brackets (B) from the
plastic bag.
2. Determine the desired locations
for your new bath accessories.
Position the base of each mounting
post on the wall where desired.
Lightly outline with a pencil. Center
a mounting bracket (B) vertically in
the outline of the base. If you are
mounting more than one mounting
bracket (B) for a bath accessory,
use a level to finalize the position
of the base of the second mounting
post and lightly outline with a pencil.
3. If attaching onto a wood wall or
directly into a wall stud, fasten each
mounting bracket (B) directly to the
wall using the mounting screws (C).
Do not pre-drill the holes.
CARE AND CLEANING
Clean periodically with a soft cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the finish and void your warranty.
LIMITED LIFETIME WARRANTY
The distributor warrants to the original purchaser of this product to be free from defects in material and workmanship under normal use in residential applications. At
its option, the Company will provide repair parts or replace defective product when the product is used in accordance with the manufacturer's specifications. The
distributor provides a limited 5-year warranty on the finish of this product to the original purchaser. At its option, the distributor will provide repair parts or replace
defective product when the product is used in accordance with the manufacturer's specifications. Use of mild abrasive, abrasive or chemical cleaners may damage
the finish of the product. We recommend cleaning your faucet with a soft cloth, moistened with water. Damage resulting from the use of abrasive or chemical
cleaners SHALL VOID THIS WARRANTY. This warranty is not applicable to any products or parts of products where damage is caused by use of nongenuine parts;
is due to installation error, product misuse, negligence or faulty maintenance; or where the product is not installed according to local building codes. This warranty
excludes labor charges or damage incurred during installation, repair or replacement, and any indirect, incidental or consequential damages, losses, injury or costs
of any nature. This warranty is in lieu of and excludes all other warranties, conditions and guarantees, whether expressed or implied, including without restriction
those of merchantability or fitness of use. Liability under this warranty will not exceed the purchase price for the product claimed to be defective by the original
consumer purchaser. Some states or provinces do not allow the exclusion or limitation of consequential damages so the above limitations or exclusions may not
apply. This warranty gives you specific legal rights and you may also have other rights which vary from state to state, or province to province.
Inquiries regarding warranty claims can be directed to 866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday. You could also contact us at [email protected].
1
B
C
F
E
D
2
B
3
Front view
Side view
Wall
C
C
4.
If attaching in drywall without a
wood stud, drill 1/4" holes in the
drywall through the mounting screw
holes in each mounting bracket
(B). Gently hammer the drywall
anchors (A) into the holes until
flush with the wall surface. Fasten
the mounting brackets (B) to the
wall with the mounting screws (C).
5.
Place the base of each mounting
post over the mounting bracket (B)
and tighten the set screw (E) at
the base of the mounting post with
the Allen wrench (D).
6.
Repeat steps 1 - 5 as needed for
the other bath hardware items.
2
4
Front view
Side view
Wall
C
B
5
B
F
E
D
6
B
G
E
D
Printed in Vietnam
