Ryobi RSI18 Manual página 3

Safety, performance, and dependability have been given top
priority in the design of your soldering iron.
INTENDED USE
The soldering iron is intended only for soldering circuits,
electrical connections, jewellery, stained glass, and other
crafts.
Do not use the product for any other purposes. The use
of the product for operations diff erent from intended could
result in a hazardous situation.
SOLDERING IRON SAFETY WARNINGS
■
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
■
The product is intended for household use only.
■
The soldering pen must be placed on its stand when not
in use.
■
Do not lay a hot soldering iron on its side.
■
Do not touch the heated tip of the soldering iron.
■
Always assume that the soldering iron tip is hot.
■
Use the soldering iron in a well-ventilated area to avoid
breathing fumes.
■
Do not point the tip of the soldering iron at another
person.
■
Do not place your hands or fingers near the tip of the
soldering iron.
■
Never leave the product unattended while it is in the on
position.
■
Always remove the battery pack and allow the soldering
tip to cool for a minimum of 30 minutes before removing
the tip. Touching a hot soldering tip can result in serious
personal injury.
■
Always remove the battery pack and allow the product
to cool before leaving, transporting or storing. Storing a
soldering iron with a hot tip can cause serious burns and/
or ignite combustible objects.
■
Remove the battery pack from the product before making
any adjustments, changing accessories, or storing the
product. Such preventive safety measures reduce the
risk of starting the product accidentally.
■
Do not allow children to use the soldering iron. It is not
a toy.
■
Do not solder live circuits.
■
Do not disassemble the product.
■
The soldering iron tip is sharp. Do not touch the tip
or allow it to come in contact with anything other than
soldering wire and the workpiece material.
ADDITIONAL BATTERY SAFETY WARNINGS
■
To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your
tool, battery pack or charger in fluid or allow a fluid to
flow inside them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a short
circuit.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or
tape. Do not transport batteries that are cracked or leaking.
Check with the forwarding company for further advice.
KNOW YOUR PRODUCT
See page 54.
1. Pen holder
2. Soldering tip
3. Soldering pen
4. Temperature control knob
5. LED indicator
6. On/off switch
7. Battery port
8. Soldering tip
9. Soldering reel
10. Operator's manual
11. Battery pack
12. Charger
LED INDICATOR
Flashing (quickly)
Solid
Flashing (slowly)
MAINTENANCE
■
Use only original accessories and spare parts. Should
components need to be replaced which have not been
described, please contact an authorised service centre.
All repairs should be performed by an authorised service
centre.
■
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.
■
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
SYMBOLS ON THE PRODUCT
V Volts
Direct current
European Conformity Mark
British Conformity Mark
Tip heating up
Tip reached working
temperature
Tip cooling
3
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL