Idiomas disponibles
Idiomas disponibles
USING YOUR
TOWER FAN
General Operations
4
Working Modes
Sleep Mode
(Mute Auto On)
Fan speed decreases every 30
minutes..
Speed decreases by two levels
at most and will remain constant
if at level 1:
For level 6: 6
5
4
For level 5: 5
4
3
For level 4: 4
3
2
For level 3: 3
2
1
For level 2: 2
1
For level 1 : 1
25
5
Touch
to turn on, and
1
to choose a working mode.
Touch
to adjust the airflow
2
volume.
Touch
to change the airflow
3
direction.
4
Touch
to set a timer.
5
Touch
to turn off the fan.
Auto Mode
Fan speed adapts to the
ambient temperature.
Normal Mode
Fan runs at the constant speed.
Natural Mode
Fan runs at alternating speeds.
Additional Features
Mute
(remote control only)
Press to turn on/off the button sounds.
Speed/Temp Switch
The display shows the fan speed by default. Long press
the Mode button to switch speed to temperature.
Firmware Update
Check the firmware version on the Dreo app and update
reguarly for the fan to work more efficiently.
Display will show "UP" during the update process. Do not
operate until the update is completed.
Timer
When the fan is ON, touch the timer button repeatedly
to set a timer (1-12 h). When the timer ends, the fan will
stop running automatically. To cancel, set the time to
0 hour.
Note:
Display will return to fan speed after 10 seconds.
Memory
If the fan is turned OFF and connected to power, it will
operate under the previous settings (except the timer
setting) when it is turned ON again.
Display Auto Off
- Display turns off after 1 minute (after 5 seconds in
Sleep mode).
- Wake up the display with any button.
- To disable this feature, please go the Dreo app.
(long press)
26
