Idiomas disponibles
Idiomas disponibles
ASSEMBLING YOUR
TOWER FAN
Assembly Instructions
When using the appliance for the first time, remove the wraps and attach the
parts by following the steps below.
arched
arched
cutout
support
1
up
down
2
Press down on edges to click two
base halves together.
19
2
Keep the base halves in a crossed
position, then hook the arched
cutout on one half onto the arched
support on the other half.
3
Run the cord through the center
hole.
4
Fit the base onto the bottom of
the fan by aligning the arrows on
the underside.
6
Thread the cord through all REAR
cord keepers and put the fan
upright.
5
Rotate the base counterclockwise
to lock in place.
CAUTION
• Do not operate the tower fan if
the base has not been installed.
• Make sure to thread the cord
through all rear cord keepers.
20
