Description Of The Product; Elements Of The Complete Installation - Erreka ARES AE3324I Manual Del Instalador

DESCRIPTION OF THE PRODUCT

1

ELEMENTS OF THE COMPLETE INSTALLATION

INSTALLATION COMPONENTS:
1 Operator
2 Flashing light
3 Exterior photocells
4 Key switch
5 Wall pushbutton
6 Switchboard
7 Connections box
8 Interior photocells
9 Electrolock
10 Stop on closing
11 Antenna

We recommend using the VIVO-M201(M) or VIVO-M101(M) switchboard for the 125/230VAC models
and the VIVO-D201(M) switchboard for the 24VDC models.
ELECTRICAL CABLING:
Element
A: Main power supply
B: Flashing light
C: Photocells (Tx / Rx)
D: Pushbutton or key switch
E: Operator (125/230 VAC)
E: Operator (24VDC)
F: Antenna
Fig. 1 Elements of the complete installation

The safe and correct operation of the
installation is the responsibility of the installer.
Nº wires x section
2
3x1.5mm
2
2x0.5mm
2 2
2x0.5mm / 4x0.5mm
2
2x0.5mm
2
4x1mm
2 2x1mm
Coaxial cable 50k (RG-58/U)
Maximum length
30m
20m
30m
25m
20m
8m (maximum 25m with cable 2x2.5mm
5m

For greater safety, Erreka recommends installing the
photocells (3) and (8).
2 )
ARES electro-mechanical operator
English
27