8. Open the closing clip 3 and lift the top cover. Remove sandwiches using
wooden or plastic tongs. Do not use metal tongs or tongs, it could damage
the non-stick surface of the plates.
9. If you are going to use the sandwich maker again, repeat the steps
described above.
10. After using the unit, disconnect the plug from the socket and close the top
cover. Do not move the appliance and allow it to cool completely.
11. Once the sandwich maker is completely cold, proceed as indicated in the
"Cleaning the unit" section.
TIPS FOR USE
Remember that the plates are coated with a non-stick surface and that you
should always use wooden or plastic utensils.
Always preheat the plates before each use.
Always clean the plates after using the sandwich maker.
If you never use margarine or butter, spread the plates from time to time
with vegetable olive oil, this will prevent sandwiches or food from sticking
together and help you to perform the cleaning of the plates more
effectively.
CLEANING THE UNIT
1. Unplug the sandwich maker from the mains socket and wait until it is
completely cold before cleaning it.
2. Use a paper napkin to remove the remains adhering to the plates, then with
a slightly moistened sponge and with a little soap or dish detergent, clean
the plates, DO NOT use metal scouring pads or abrasive liquid cleaners.
3. Use a slightly damp cloth to rinse the plates and then dry the plates with a
dry cloth.
4. Clean the outside surface with a slightly damp cloth, DO NOT use metal
scouring pads or abrasive liquid cleaners, then carefully dry the exterior
surface.
Attention: Do not submerge the sandwich maker in water or other liquid,
and do not put it in the dishwasher either.
All manuals and user guides at all-guidesbox.com
6