Removing, Reversing And Replacing - LG LRDN2272 Serie Guía De Usuario

REMOVING, REVERSING AND REPLACING

REFRIGERATOR DOORS (OPTIONAL)
NOTE: See the Parts and Features section on pages 9-10
to match your model.
NOTE: Reversing the refrigerator door is not possible on
water dispenser models
TOOLS NEEDED: 10mm hex-head socket wrench,
No. 2 Phillips screwdriver, flat-head screwdriver,10mm
open-end wrench, flat 2-inch putty knife.
IMPORTANT: Before you begin, turn the refrigerator OFF
and unplug it. Remove food and any adjustable door or
utility bins from doors.
HOW TO REVERSE DOOR OPENING DIRECTION
(when converting from the left-opening type to right-
opening type)
1. Removing Refrigerator Door
Remove the top hinge cover (1).
Remove the 3 screws and lift off the top hinge (2).
Lift the Refrigerator door (3) slightly and remove it.
Pry off the cover (4) using a slotted screwdriver and
attach it on the right.
Loosen the screw (5), remove the stoppers (6), and
attach them on the left (on the opposite side).
Loosen the pin (8) and remove it.
Loosen the 2 screws (9) and the 2 screws (10), and
lift off the middle hinge (11).
Pry off the cover (7) using a slotted screwdriver and
attach it on the right.
2. Removing Refrigerator Handle
Remove the cap (1) by using a slotted screwdriver.
Loosen the 4 screws (2), take off the handle (3), and
install it on the right.
Turn the handle upside down and assemble it in the
opposite side of the refrigerator door (4).
Attach the removed the cap (1) on the left.
REFRIGERATOR INSTALLATION
13