Idiomas disponibles
Idiomas disponibles
STEP 13
5
(x2)
5
I
5
C
G
I
Wall to be mounted to.
With the assistance of another person, locate and mark the studs in the wall that the cabinet will be
mounted to. Mark the location of the studs with a pencil.
Position the wall hanger (I) on the wall and mark the locations of the studs on the back rail. Drill two 3/16"
diameter holes in the wall hanger (I) at the stud locations. Using a level, attach the wall hanger (I) to the
wall with two screws (5) as shown. It is important that the wall hanger is mounted to a minimum of as least
two studs. With the help of another person, place the assembled component onto the wall hanger (I) so the
two beveled edges on the back rail (G) and wall hanger (I) mate together.
20
systembuild.com
You
Tube
