Idiomas disponibles
Idiomas disponibles
EN
3.5
INSTALL THE POWER CORD STORAGE
ARMS
9
1.
Attach each of the power cord storage arms
(9) into the two separate positions on the lower
handle of the fixture.
2.
Align the screw with the holes in each of the two
power cord storage arms (9).
3.
Push the screw through and tighten both power
cord storage arms (9) with a Phillips head screw
driver (not included).
3.6
INSTALL THE UPPER HANDLE
1.
Align the holes on the upper handle (23) and the
lower handle (24).
2.
Insert the handle bolts (25) and use the handle
knobs (15) to tighten them.
3.7
INSTALL THE SPRAY WAND
4
1.
Push the end of the spray wand (4) into the
trigger handle (1) and rotate clockwise to secure.
2.
Pull on the spray wand (4) to be certain it is
properly secured.
Make sure that the connection has no leakage.
23
15
24
25
1
WARNING
English
3.8
INSTALL THE HIGH PRESSURE HOSE
16
1.
Push and turn clockwise one end of the high
pressure hose (11) into the inlet coupler (8).
2.
Install and tighten the other end of the high
pressure hose onto the water outlet (16) coupler.
4
OPERATION
Make sure that all the connections are tight and
have no leakage before operation.
4.1
CONNECT THE WATER SUPPLY TO THE
MACHINE
For easy operation, please use a self-coiling garden
hose (not provided).
When you operate the self-coiling hose, make sure
that the hose has no blockage.
• The water supply must come from the water main
• Do not use hot water
Always observe all the local regulations when you
connect the garden hose to the water supply. Direct
connection through a receiver tank or backflow
preventer is usually permitted.
Inspect the filter in the water inlet connector before
you connect the garden hose
• If the filter is damaged, do not use the machine
until the filter is replaced.
• If the filter is dirty, clean the filter.
8
8
11
WARNING
WARNING
WARNING
WARNING
CAUTION
