Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
6499348COM
2 Door Wall Cabinet
Date of Purchase ___ / ___ / ___
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-866-452-4081 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.systembuild.com
WARNING
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
Easy
Assembly Difficulty Meter
For the latest information on SystemBuild products
follow us at Ameriwood Home
B346499348COM1
Tough
You
Tube
Manuales relacionados para System Build 6499348COM
Resumen de contenidos para System Build 6499348COM
- Página 1 6499348COM 2 Door Wall Cabinet B346499348COM1 Date of Purchase ___ / ___ / ___ Lot Number: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Do Not Return This Product! Contact our customer service team for help first.
- Página 2 Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-866-452-4081 Monday-Friday 9am - 5pm CST Tube Visit systembuild.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 - Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Página 3 Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Parts are labeled on the surface or edge of the part Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing,...
- Página 4 Before You Start Please Note: You may need to lightly tap the wood dowels into the holes during your assembly process. systembuild.com Tube...
- Página 5 Board Identification Not actual size Left Panel Right Panel 36499348030 36499348010 36499348020 Bottom Door (x2) Adjustable Shelf 36499348040 36499348061 36499348050 Lower Rail Cabinet Hanger 36499000080 36499000070 Back Panel K649934800 This piece is paperboard construction. Wall Hanger It is not made from wood, but is 36499000090 required for the assembly of your unit.
- Página 6 Board Identification Not actual size systembuild.com Tube...
- Página 7 Part List Actual Size (x4) #A13950 #8 X 3-1/2" screw (x12) (x12) (x12) #A22700 #A21670 #A22710 cam lock wood dowel (x4) cam bolt #A13800 #8 x 2-1/4" screw (x4) (x3) (x4) (x4) (x2) #A89370 #A23030 #A80250 #A17400 #A11080 door bumper confirmat screw shelf support 7/8"...
- Página 8 STEP 1 (x1) (x1) (x6) systembuild.com Tube...
- Página 9 STEP 2 (x1) (x1) (x6) systembuild.com Tube...
- Página 10 STEP 3 Quick Assembly (x4) Proper orientation of CAM LOCK systembuild.com Tube...
- Página 11 STEP 4 Quick Assembly (x4) Proper orientation of CAM LOCK systembuild.com Tube...
- Página 12 STEP 5 Quick Assembly (x4) Proper orientation of CAM LOCK systembuild.com Tube...
- Página 13 STEP 6 (x6) Dip dowels into water to activate glue. Press the wood dowels into holes as shown. finished edges to front Cam locks in G and H to outside, C and D to inside. systembuild.com Tube...
- Página 14 STEP 7 finished surface systembuild.com Tube...
- Página 15 STEP 8 Dip dowels into water to activate glue. Press the wood dowels into holes as shown. (x6) finished edges to front systembuild.com Tube...
- Página 16 STEP 9 (x3) systembuild.com Tube...
- Página 17 STEP 10 (x4) finished edge systembuild.com Tube...
- Página 18 STEP 11 (x4) (x4) (x2) (x4) systembuild.com Tube...
- Página 19 STEP 12 systembuild.com Tube...
- Página 20 STEP 13 (x2) Wall to be mounted to. With the assistance of another person, locate and mark the studs in the wall that the cabinet will be mounted to. Mark the location of the studs with a pencil. Position the wall hanger (I) on the wall and mark the locations of the studs on the back rail. Drill two 3/16" diameter holes in the wall hanger (I) at the stud locations.
- Página 21 STEP 14 (x4) (x2) After the assembled component is placed onto the wall hanger, mark the location of the studs on the back panel (J). Fastening the cabinet to the studs by driving screws (4) through the cabinet hanger (G) and lower rail (H) as shown. (x2) Wall to be mounted to.
- Página 22 STEP 15 systembuild.com Tube...
- Página 23 STEP 16 Door Adjustment To adjust the vertical height: Loosen the screws "A" on both hinges. They are usually in slotted holes which allows you to adjust up or down by a few mm. Then tighten back up. To adjust side to side: Loosen the screw "C"...
- Página 24 Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 0 lbs 0.0 kg 30 lbs 13.6 kg 35 lbs 15.9 kg 40 lbs 18.1 kg (Clothes Rod) Warning: Risk of injury to persons - do not place a television on this furniture.
- Página 25 Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit systembuild.com Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You"...
- Página 26 Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-866-452-4081 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.systembuild.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte.
- Página 27 Español Página 20 Pared de la instalación. Con la ayuda de alguien más, localice y marque los travesaños de la pared donde se instalará el gabinete. Marque la ubicación de los travesaños con un lápiz. Coloque el soporte de pared (I) sobre la pared y marque la ubicación de los travesaños en el riel trasero. Taladre dos orificios de 3/16 de pulgada de diámetro en el soporte de pared (I) y sobre la ubicación de los travesaños.
- Página 28 Español Página 24 CARGA MAXIMA Esta unidad ha sido diseñada para soportar la carga máxima anotada. El exceder estos límites puede causar inestabilidad, colapsarse y/o causar serias lesiones. ADVERTENCIA: Riesgo de lesiones a las personas - no coloque un televisor sobre muebles. Este mueble no está...
- Página 29 Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-866-452-4081 (sans frais) du Lundi au Vendredi de 9h à...
- Página 30 Français Page 20 Mur à monter. Avec l'aide d'une autre personne, localisez et marquez les montants du mur sur lesquels l'armoire sera montée. Marquez l'emplacement des montants avec un crayon. Positionnez le support mural (I) sur le mur et marquez l'emplacement des montants sur le rail arrière. Percez deux trous de 3/16"...
- Página 31 Français Page 24 CHARGES MAXIMALES Ce meuble a été conçu pour supporter les charges maximales indiquées. En excédant ces limites de charge, le meuble pourrait devenir instable, s'effondrer, et/ou causer des blessures graves. AVERTISSEMENT : Risque de blessure corporelle - ne pas placer une télévision sur ce meuble. Ce meuble n'est pas approuvé...