Idiomas disponibles
Idiomas disponibles
EXISTING CONSTRUCTION INSTALLATION INSTRUCTIONS (continued)
10. Attach the duct connector to the fan housing (A) with the
screws that were set aside when the duct connector was
removed earlier.
11. Connect a 6 in. circular duct (not supplied) and vent to the
outside. Secure it with duct tape (not supplied) or a clamp
(not supplied) to make the connection secure and airtight.
Turn on the power source. Check the fan for any abnormal
sounds or vibrations.
12. Attach the grille (B) by pinching the mounting springs and
inserting into the narrow rectangular slots in the fan
housing (A).
HUMIDITY SENSING OPERATION
1. To use full speed mode, move the wall switch to the "ON"
position. The LED indicator light in the fan is RED.
10
11
12
Mounting
springs
1
10
A
Duct connector
A
HomewerksWW.com
B
