Idiomas disponibles
Idiomas disponibles
Use software to operate xTool F1
Visit
xtool.com/software
to download and install
1
xTool Creative Space (XCS).
XCS
You can start your creation after connecting xTool F1 to XCS.
For details about how to use XCS to operate xTool F1 for material processing, visit support.xtool.com.
Using the infrared laser for bitmap engraving at a low temperature may lead to unsatisfying engraving results. To
ensure better engraving results, you can preheat the laser module before processing.
Multiple application scenarios
Process small-sized materials
To cut a material, you are advised to use the triangular prism working panel. It can reduce the areas burned during
material processing and protect the baseplate.
5
Turn on xTool F1, connect it to a PC, and then
2
connect it on XCS.
Connect device
Process large-sized materials
Manual focus setting
Turn the knob to move the laser module up and down. When the red and blue light spots coincide, the focus is successfully set.
When the bottom of the laser module reaches
the highest point, stop turning the knob up.
Process materials with slopes
6
