UHPPOTE HBK-D01 Manual Del Usuario página 5

Remarks: The card reader will prompt sound and light indication only
when the LED and BEEP cables are connected to the access controller.
8. War m Tips
· Confirm the voltage (12VDC) and differentiate positive anode and cathode
of the power supply.
· About the wiring between the reader and the controller, the wire should be
22 AWG at least and the length should not exceed 100 meters.
· When external power is used, suggest to use same power GND with contr-
oller panel. It is recommended to use multi-strand twisted pair cable to co-
nnect card reader to access controller.
· There is no need to wire the LED and BEEP cables if you do not need the
card reader to prompt an authorized card through sound and light.
9. Packing List
Name
Card Reader
User Manual
Plastic Anchors
Self-Tapping Screw
10. Packaging Details
After opening the package, please make sure the card reader is in good
condition and confirm below accessories are complete or not.
Card Reader x1
Quantity
1
1
2
2
Accessories Package x1
4
Remarks
Used for fixing
#7 x 1", used for fixing
UHPP TE
HBK-D01
User Manual
EN
WIEGAND RFID READER
EN USER MANUAL
ES MANUAL DEL USUARIO
x1