UHPPOTE HBK-D01 Manual Del Usuario página 2

1. Introduction
The RFID card reader can't work alone and it needs to work with wiegand
protocol access controller, such as access control panel, fingerprint
device or master controller.
It uses ST MCU to ensure stable performance, and low-power circuit
makes the service life longer.
2. Features
Waterproof, conforms to IP66.
Support wiegand 26bits or wiegand 34bits output format.
The maximum reading distance is 2-23/64" 6cm .
Ultra-low power consumption, the standby current is less than 50mA.
Fast response speed, the door opening time is less than 0.3s.
It is useful for safety door system, easy to connect and use.
Widely used in factories, houses, residential quarters, offices,
mechanical and electrical control equipment and so on.
3. Specication
Working Voltage
Working Humidity
Product Weight
Lead Cable Length
Enclosure Material
Status Indication
Enclosure Size
Working Temperature
Output Format
LED Status Indication
12VDC
10%-90%RH
2.96oz [84g]
"
9-27/32 [250mm]
ABS Plastic
Bi-color LED + Buzzer
"
3-35/64 x 1-49/64 x 3/4 [90x45x19mm]
-40 to +140°F [-40 to +60°C]
Wiegand 26bits (default), Wiegand 34bits (optional)
Red means standby, Green means activated
[
Static Current
Frequency
Card Type
Waterproof Rating
Panel Material
Communication Distance
" "
1
EN
]
≤50mA
125KHz
EM-ID
IP66
PC Plastic
<328'