Manual Settings; Temperature And Humidity; Wind Speed - TFA 35.1140 Instrucciones De Uso

TFA_No. 35.1140_Anleitung 05.08.2016 08:55 Uhr
SPRING BREEZE - Colour wireless weather station
• Press LIGHT (HI – LOW - OFF) button once (LOW) to dim the backlight.
• Press LIGHT (HI – LOW - OFF) button once more (OFF) to turn off the backlight.
• The backlight is deactivated.
• To temporarily activate the backlight, press any button (in battery operation only).
7. Operation
• During the operation, all successful settings will be confirmed by a brief beep tone.
• The device will automatically quit the setting mode if no button is pressed for a few seconds.
• Press and hold the ▲ or ▼ button in the setting mode for fast mode.

7.1 Manual settings

• Press and hold the TIME SET button in normal mode for three seconds, to enter the setting mode.
• Beep (ON=default) flashes on the display.
• Press the ▲ or ▼ button to activate or deactivate the key tone.
• Press the TIME SET button again to do the settings in the following sequence: the radio signal reception (RCC ON - default), time zone (0H -
default), the 12 or 24 hours system (24H - default), the hours, the minutes, the year, the month and the day, the wind speed unit (BFT - default),
the temperature unit (°C - default) and the day-of-the-week language (GER - default). Press the ▲ or ▼ button to adjust it.
• Confirm the setting with the TIME SET button.
• Once the DCF time signal is successfully received, the manually set time is overwritten, if the DCF reception is activated.
7.1.1 DCF reception
• By default, the DCF reception is activated (RCC on) and after successful reception of the DCF signal no manual adjustment is necessary.
• In the setting mode, press the ▲ or ▼ button if you want to deactivate the DCF reception (OFF).
• Confirm the setting with the TIME SET button.
7.1.2 Time zone setting
• In the setting mode, press the ▲ or ▼ button to make the time zone correction (-12/+12).
• The time zone correction is needed for countries where the DCF signal can be received but the time zone is different from the DCF time (e.g.
+1=one hour plus).
• Confirm the setting with the TIME SET button.
7.1.3 Setting of the 24- or 12 hour system
• In the setting mode you can choose between the 12 - or 24 hour system.
• Press the ▲ or ▼ button.
• In 12 HR system AM (before noon) or PM (after noon) appears on the display.
• Confirm the setting with the TIME SET button.
7.1.4 Setting of the wind speed unit
• In the setting mode you can choose between BFT (Beaufort) or km/h (Kilometer per hour) as wind speed unit.
• Press the ▲ or ▼ button.
• Confirm the setting with the TIME SET button.
20
Seite 11
SPRING BREEZE - Colour wireless weather station
7.1.5 Temperature unit setting
• In the setting mode you can change between °C (Celsius) or °F (Fahrenheit) as temperature unit.
• Press the ▲ or ▼button.
• Confirm the setting with the TIME SET button.
7.1.6 Setting of the day-of-week language
• In the setting mode choose the day-of-the-week language.
• Press the ▲ or ▼ button.
• In the display appears: German - GER, English - ENG, French - FRE, Italian - ITA, Spanish - ESP and Dutch - NET.
• Confirm the setting with the TIME SET button.

7.2 Temperature and humidity

7.2.1 Maximum and minimum values
• Press the ▲ button in normal mode.
• MAX appears on the display.
• You can now get the indoor and outdoor highest values for the temperature and humidity displayed since the last reset.
• Press the ▲ button again.
• MIN appears on the display.
• You can now get the indoor and outdoor lowest values for the temperature and humidity displayed since the last reset.
• Press the ▲ button once more, to go back to the current values display.
• The device will automatically quit the MAX/MIN mode if no button is pressed.
• Press and hold the ▲ button for 3 seconds while the maximum or minimum values are displayed to clear the recorded maximum readings.
• The maximum and minimum values are automatically reset at midnight.
7.2.2 Trend arrows
• The trend arrows indicate whether the values for outdoor temperature and humidity are currently increasing, steady or decreasing.

7.3 Wind speed

• The wind wheel symbol is animated and moves according to the wind speed.
• The coloured diagram shows the current wind speed in different colour sections.
• Blue = 0-20 KMH
• Yellow = 20-30 KMH
• Orange = 30-50 KMH
• Red = >50 KMH
• The current wind speed (CURRENT SPEED) is indicated in the selected unit (Beaufort or KM/H). Hold and press the HEAT/DEW button for 3
seconds to change between Beaufort and KMH.
• The maximum wind speed covers the last hour. Press the HISTORY button to display sequentially the value of the last 24 hours, 7 days, 30 days
and the last year with time and date of recording.
21