Idiomas disponibles
Idiomas disponibles
Functional Description
The air flow generated by the motor fan flows to the spray gun. The air flow serves to
atomize the coating material to the nozzle, and to pressurize the container. This
pressure promotes the coating material through the riser pipe to the nozzle. Air flow and
pressure settings are adjustable.
Coating Materials
Solvent-based and water-based paints, finishes, primers, two-component paints,
varnishes, automotive topcoats, stains and
wood preservatives.
Preparedness the Coating material
Note: Before spraying, the material being used may need to be thinned with the proper
solvent as specified by the material manufacturer. Never exceed the thinning advice
given by the coating manufacturer.
(viscosity = thickness of the liquid coating material)
Measuring the viscosity
1 Stir the spray material thoroughly before measuring viscosity
2 Dip the viscosity cup completely into the spray material. Then hold the viscosity cup
up and measure the time in seconds until the liquid empties out . This time is referred
to as runout time. Required runout time as follow
Viscosity table
Coating material viscosity DIN-s
Solvent-based paints
Primers
Pickling
2 Kompnenten paints
Varnishes
Waterborne paints
Automotive topcoats
Wood protection center l
FIG. 3
9
15-50
25-50
undiluted
20-50
15-40
20-40
20-40
undiluted
