SOLAC LUCID i10 Instrucciones De Uso página 28

ANOMALIES
- In case of detecting any anomaly, check the following table:
ERROR Nº BLINKS AND BEEPS
1
2
3 SOLID RED INDI-
CATOR LIGHT
4
5
6
BREATH RED
INDICATOR LIGHT
7
LIKELY CAUSE
BEEP ONCE Front caster wheel
is stuck
BEEP TWICE Robot's side
brush probably
stuck
BEEP TRIPLE "Robot's vacuum
fan is stuck or its
filter is clogged."
BEEP QUARTIC Robot's rolling
brush can't turn.
BEEP TWICE Bumper is stuck.
BEEP TRIPLE Robot's cliff sen-
sors are dirty or it
is stuck on a dark
surface.
BEEP QUARTIC "Robot cannot
return to its
Charging Dock or
starting position."
WHAT TO DO
"Clean the front caster
wheel and press the
power button to restart
the Robot."
"Clean the side brush
and press the power but-
ton to restart the Robot."
"Remove and empty
Robot's bin. Clean
Robot's filter.Then, bris-
kly tap the bin to loosen
any remaining trapped
debris."
"Remove and clean
Robot's rolling brush and
caps."
Check whether the bum-
per is flexible.
"If Robot is hanging
over a drop,or on a dark
surface, start in a new
location. Otherwise,wipe
its cliff sensors with a dry
cloth."
"Ensure there are no
obstacles in front of
the Charging Dock or
starting position.Wipe
the Charging contacts on
both the Charging Dock
and robot with a clean,
dry cloth."