Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Note: To check the remaining sleep time, tap the SNOOZE /SLEEP BUTTON (#18) once.
DIMMER OPERATION
Tap the DIMMER BUTTON (#12) repeatedly to select the brightness settings of the
display (High, Low).
USB BATTERY CHARGING
CONNECTING A USB CORD (NOT INCLUDED) FOR CHARGING YOUR CELL PHONE
(DC 5V ==== 1.0A)
1. Plug the standard end of the USB cable (not included) into the USB CHARGE PORT
(#19) located on the back of the DCR-300. Plug the other end of the cable into the
device you wish to charge.
2. Observe the battery charge indicator on your device to make sure the charging
process starts normally.
3. Unplug the cable when your device is fully charged.
WARNING!
• The USB port located on the back of the DCR-300 is designed for a smart phone
or portable device battery charging only and does not support data transfer or
connection to a computer.
• Don't connect the USB port of the DCR-300 to another USB charger. It may damage
both units and void the warranty.
WIRELESS CHARGING
This unit will wireless charge compatible wireless charging phones.
Center device with back side down on the WIRELESS CHARGE BASE (#20) on the top of
the DCR-300, The CHARGE INDICATOR (#16) will light.
CAUTION:
Remove metal protective or magnetic case from phone before charging. When charging
phone, do not place magnetic-striped or other metal objects on the charger. Doing so
could damage the object or this unit. Compatible phones with metallic nishes will
charge normally.
CARE AND MAINTENANCE
• Clean the radio with a soft damp cloth and let all parts dry completely after
cleaning.
• Do not use any aggressive cleaners, brushes with nylon bristles, sharp or metallic
cleaning utensils, knives, hard scrapers and the like. They could damage the surfaces
of the radio.
• Do not immerse the radio in water and do not let water getting into the housing of
the radio.
EN
20
Tabla de contenido
