Denver TSP-503 Manual De Usuario página 6

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 63
11. Do not attempt to replace the battery. For repairing and servicing, please consult the
store of purchase or customer service centre designated by the store.
CAUTION: Danger of explosion if battery is incorrectly replaced.
12. Do not use any other power supply other than the one specially designed for this
product.
13. Keep this operating instruction in a safe place.
14. Contact an authorized service centre if you have any inquiry about this product.
POWER CONNECTION
- Unpack this product, ensure the power
ON/OFF switch is on "OFF".
- Connect the supplied AC adaptor to
this product, plug the AC adaptor to
the wall outlet.
- Battery GREEN LED indicator will turn
to orange.
RECHARGING
- Unit comes with a battery indicator alert.
- If Battery Low LED flash, it means the
battery level is low and recharging is
required.
- By connecting the AC power, the Battery
Full LED will turn orange, it means the unit
is under recharging.
- The Battery Full LED become green, it
means the level of battery is fully charged.
It is recommended to charge the battery about 6 hours before you start using
the unit for the first time.
Energy Saving: If this product is idle for about 20 minutes, it will go to
standby mode automatically. It will auto power off.
Caution: To keep and protect the
rechargeable battery in good condition,
users should check the unit and be sure
to turn the Power On/Off switch on the
side panel to "Off" every time after using
and
before
recommended that users should
recharge the battery at least once in
every two months.
storage,
it
is
highly
fully
EN-4
POWER
ON
OFF
LINE IN
DC JACK
USB
1A CHARGER
MIC 1
MIC 2
POWER
ON
OFF
LINE IN
DC JACK
USB
1A CHARGER
MIC 1
MIC 2
Low
Full
Battery
loading