Idiomas disponibles
Idiomas disponibles
42 MAINTENANCE
Thawing out the Appliance
Running the Thawing Mode
1
Turn on the appliance and press the Less
Time button for 3 seconds.
NOTE
• Press only the Less Time button on the control
panel to activate the thawing mode.
• Only the Power and Start/Pause buttons work
when the thawing mode is activated.
• The thawing time cannot be changed manually.
• To deactivate the thawing mode, turn off the
appliance.
2
Press the Start/Pause button to start the
thawing mode.
• Actual thawing time varies depending on
the installation environment such as
installation location and ambient
temperature of the appliance.
3
When thawing is complete, dry clothes as
usual.
Thawing out the Appliance Manually
1
Open the dryer door and pull out both the
inner and outer filters.
2
Carefully pour 34 oz. (1 liter) of hot water at
140 ℉ / 60 ℃ into the lint filter compartment
and then reinsert both lint filters.
CAUTION
• Pouring more that 51 oz. (1.5 liters) of water into
the compartment will cause water to leak out.
• Wear gloves and use care when pouring hot
water. 140 ℉ (60 ℃) water can cause scalding or
burns. Using water that is hotter than that can
cause the appliance to malfunction.
3
Turn on the appliance and run the Normal
cycle for about 30 seconds. Then wait about
30 minutes.
4
Run the Normal cycle again. Check if the
message appears or
minutes of running the appliance.
• If the
message or
OE
step 2 and repeat procedure.
• If the
message or
OE
thawing process is done.
5
When thawing is complete, dry clothes as
usual.
OE
lights up within 10
E
E
icon appears go to
do not appear, the
E
