EN
5.1
CLEAN THE MACHINE
The machine must be dry. Humidity can cause risks of
electrical shocks.
•
Clear the unwanted material out of the air vent with a
vacuum cleaner.
•
Do not spray the air vent or put the air vent in solvents.
•
Clean the housing and the plastic components with a
moist and soft cloth.
5.2
GENERAL MANINTENANCE
•
Before each use, examine the machine for damaged,
missing, or loose parts such as screws, nuts, bolts and
caps.
•
Clean the machine with a dry cloth. Do not use slovents.
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
Use only approved replacement parts.
6
TECHNICAL DATA
Voltage
Strokes per minute
Cutting angle
Orbital motion
Blade changing
Weight without battery
Battery model
Charger model
Measured sound pressure
level
Measured sound power level 99.5dB(A), K
Vibration
The recommended ambient temperature range:
Item
Appliance storage tempera-
ture range
CAUTION
WARNING
CAUTION
24 V
-1
0-3000 min
0-45°
4 settings
Tool-Free
2.2 kg
P2448B2 / P2448B4 /
P2448B6 and other BAM
series
P2448C and other CAM ser-
ies
88.5dB(A), K
= 5 dB(A)
pA
= 5 dB(A)
wA
2
5.2 m/s
, K = 1.5 m/s
Temperature
32°F (0°C) - 113°F (45°C)
English
Item
Appliance operation temper-
ature range
Battery charging temperature
range
Charger operation tempera-
ture range
Battery storage temperature
range
Battery discharging tempera-
ture range
7
WARRANTY
(The full warranty terms and conditions can be found on
Powerworks webpage)
The Powerworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner's manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
8
EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
Address:
Name and address of the person authorised to compile the
technical file:
Name:
Address:
Herewith we declare that the product
2
Category:
Model:
Serial number:
Year of Construction:
6
Temperature
32°F (0°C) - 113°F (45°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 104°F (40°C)
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
GLOBGRO AB
Globe Group Europe
Riggaregatan 53, 211 13 Malmö, Sweden
Peter Söderström
Riggaregatan 53, 211 13 Malmö, Sweden
Jig saw
JSM401
See product rating label
See product rating label
