Cleaning And Maintenance - Mx Onda MX-AS2060 ERP II Manual De Instrucciones

Note: To avoid static electricity that can be generated by rubbing on carpets,
etc., try not to suck long particles very fine dust and will avoid the possible
accumulation of static electricity on the extension tube.
Turn on the vacuum cleaner
Pull the plug and the supply cable will unrolling. The total cable length is 4.5
meters. When you see a mark appear red pull cautiously and very soft to avoid
damaging the cord or cable system itself collects as this indication warns you of
the last 10 cm.
To turn on the vacuum cleaner press switch on
/ off " ".
When the unit is running, proceed to the work
of cleaning.
Suction flow regulator
The suction flow regulator C is located in the handle of the flexible hose. Use
the slider to reduce the flow of suction for cleaning upholstery, curtains, etc.
Slide the regulator C forward or backward to adjust the degree of vacuum
according to the type of cleaning to be done.
The maximum degree of suction is obtained when the regulator is in the
position C which completely covers the hole regulation.
Turn off the vacuum cleaner
Once finished using, press the switch on / off "
to turn off the vacuum cleaner. Then unplug the
cable from the power supply and press the button
includes cable H "
Note: Before pressing the rewind button H to hide the cable, hold the plug,
since the wound, it moves very quickly and could hit to you. Or some object.

CLEANING AND MAINTENANCE

For best results during the cleaning process will always be necessary that both
the dustbin and all the filters are perfectly clean. If applicable to the work of the
cleaner use and these elements are dirty, the suction power will decrease
considerably. You should never operate the vacuum cleaner without all the
filters are correctly placed in position and completely clean, otherwise dirt
particles can penetrate inside the vacuum causing engine damage.
" until the end of coiled wire.
"
8