Time recording
management
Firmware
update
Storage management / device storage
TF card storage
detection option. When a humanoid is detected, an alarm
message (Push) is generated.
- Detection sensitivity: Set the sensitivity of humanoid
detection.
- Motion detection area: Set/change the detection area
or warning line. Improve the motion detection by deleting
marked areas that often trigger motion detection.
- Motion detection sensitivity: Select the sensitivity of
the motion detection. Depending on the circumstances, a
different attitude may be the best.
- Smart detection recording: Enable/disable detection
of a moving object in the image, the camera will record
the video and save it to MicroSD card.
-
Alarm
message
Enable/disable this function to get push notifications from
the camera with every detected humanoid or motion.
- Alarm time setting: Choose the time you need the
motion detection to be enabled/disabled.
- Humanoid marker: Enable/disable
- Humanoid tracking: Enable/disable; When a human is
detected, it will automatically follow the movement.
- Alarm prompt tone: Enable/disable to hear a siren
sound from the camera with every detected motion. After
you enabled the function you can choose to use the
default sound or customize the alarm by recording your
own sound.
Set the recording schedule for continuous recording.
Enable Time video and set the recording schedule.
Click and check if there is new software version. If there
is, click and update directly to achieve OTA upgrade of
the device. If the version is already the newest, there will
be a prompt.
Below options are listed under Device Storage.
- TF card status: Show the status of MicroSD card
(normal or abnormal). If the status is abnormal Format
the MicroSD card. This takes about 3-5minutes.
- Remaining available capacity: Shows available
storage capacity of MicroSD card.
- Format: Click it to format the MicroSD card. The
procedure is about 3-5 minutes and is not blocked by
push
/
Push
Model: TX-192 Article No. 4991, 07/2022
notification:
21
