IKAR DB-A3R Instrucciones De Uso página 21

ENGLISH
7
Anchorage point in accordance with EN 795
The anchorage point (large eyelet( )) is suitable for anchoring the
10
deployed subsystems of the fall arrest shock absorbing device of the
10
personal protective equipment e.g. in accordance with EN 354/355
and EN 360 ( ).
7
HRA device
9
Assembly of optional components /
8
11
accessories:
The IKAR HRA fall arrest device with the rescue-lifting
equipment is secured to a leg ( ) via the mounting bracket.
11
This must be carried out by a competent person.
To do so, attach the mounting bracket ( ) to the leg so that the
11
safety supervisor can operate the rescue winch of the IKAR HRA
device easily in the event of a rescue ( + + ). The correct
8 9 10
clamping tension of the mounting bracket is achieved by the length
(45.8 mm) of the spacer sleeves (also supplied). The tightening
torque of the hexagon screws bolts of quality class 8.8 M 10x80 is
10
Locking bar
49 Nm. The locking bar should be positioned according to the device
size. The tightening torque of the cylinder head screws of quality
class 8.8 M 8 x 40 is 20 Nm. Insert the IKAR HRA device into the
mounting bracket. The IKAR HRA device is secured to the mounting
bracket via the socket pin.
Caution: Use IKAR mounting brackets only. Itam HRA 9.5/12
Itam HRA 15/18
Only IKAR equipment should be attached to IKAR mounting
brackets.
Itam HRA 18/24/33
Itam HRA 42
Locking bar
M 8x30
Spacer sleeve
M 10x80
21