Idiomas disponibles
Idiomas disponibles
• Automatically checks for correct polarity (requires a minimum of 4.0 volts
battery voltage)
• Convenient, color-coded ring terminals/clamps for easy, correct installation
• Charges with high frequency, pure, DC current
Figure 1. 2/1 Amp Battery Charger Connection Diagram
110/120 VOLT AC PLUG END
CABLES
BATTERY HARNESS
CLIPS
CHASSIS
OPERATING INSTRUCTIONS
Ensure that all installation and operating instructions and safety
precautions are understood and carefully followed by anyone
installing or using the charger. Follow the steps outlined in
"Important Safety Instructions" at the front of this manual.
Charging Indicators
Red LED
Bad connection, battery not able to accept charge, reverse
polarity connection
Yellow LED
Connection correct and charging
Green LED
Battery fully charged
When the charger is properly connected, the LED will illuminate, indicating the
inside smart circuit is functioning to judge the battery status. This procedure may
take up to 2 minutes if the battery voltage is lower than 12.8 volts.
2/1 AMP BATTERY CHARGER
BATTERY
– 6 –
ACCESSORY OUTLET
DC ACCESSORY
PLUG
BATTERY
BATTERY TERMINAL
RINGS
