Idiomas disponibles
Idiomas disponibles
CUTTING
CUTTING PREPARATION
Place the angle attachment into the
cutter head and push it as much as you
can to the bottom. Change the cutting
angle from 90° to 45° as needed.
WARNING: Do not put your fingers
against the sharp edge of the blade at
any time.
STRAIGHT CUT (90° ANGLE)
Insert material between the cutting blade
and the base as shown and hold the
material with the flooring holding bar ,
then push handle down to complete
a cut.
WARNING: Do not put your fingers
against the sharp edge of the blade at
any time.
ANGLE CUT (45° ANGLE)
Install the 0-45° Attachment as shown.
Position the cutting angle to the
45° angle.
WARNING: Do not put your fingers
against the sharp edge of the blade at
any time
- 3 -
