Continuous Display Of Measured Result (Hold); Perform Relative Measurements; (Zero) - Seca 264 Manual De Instrucciones Y Garantía

Continuous display of
measured result (Hold)
Perform relative
measurements (zero)
60 •
7. Align the patient's Frankfurt horizontal with the
matching one of the three Lines of the Frankfurt
measure.
8. Keep the brake button pressed and correct the
position of the head slide.
9. Read off the height on the head slide display.
10. Press the Enter key (send/print) to transmit the
height to receivers from the
system.
– Press key briefly: send measured results to all
receive-ready devices
– Hold down: print measured results
If you activate the HOLD function, the measured value
continues to be displayed after the measurement is
complete. This allows you to move the head slide
before noting down the measured value.
1. Briefly press the arrow key (hold/zero), after you
have positioned the head slide.
The message "HOLD" is displayed.
The head slide can now be moved without the
measured value displayed changing.
2. To disable the HOLD function, press the arrow key
(hold/zero).
The "HOLD" message is no longer displayed.
The head slide display can be set to zero at any
position. This function allows relative measurements,
for example for measuring extremities.
1. Press the Start key
"----" appears in the display.
2. Keep the brake button pressed and move the head
slide until a length value appears in the display.
3. Position the head slide at the point you want to set
the head slide display to zero.
4. Keep the arrow key (hold/zero) pressed until
the "ZERO" message is displayed.
The display is set to zero at the current position of
the head slide.
seca 360° wireless
of the head slide.