Idiomas disponibles
Idiomas disponibles
BLENDER PARTS
ES
1 Measuring cup
2 Bowl cover
3 Glass cup
PT
4 Sealing ring
5 Cutting blades
EN
6 Cup base
7 Engine base
FR
8 Rotary switch
BEFORE FIRST USE
▶You must clean all parts that will come into contact with food with
soap and water. Once clean, let them dry before starting the blender.
▶Clean the body with a soft cloth.
▶Pull out the required length of cable that is stored in the base of the
blender and connect the device to the mains.
ASSEMBLE THE GLASS
▶Place the rubber sealing ring (4) on the inner edge of the blade unit
(5).
▶Place the blade unit with sealing ring on the base of the cup (6).
▶Mount the jar (3) onto the base by turning clockwise until the jar
snaps into place.
▶Assemble place the measuring cup (1) on the jar lid (2).
▶Make sure the cap is on properly.
HOW TO USE
1. Place the mixer on a flat, stable surface.
2. Do not place any objects on top of the mixer while it is
in use.
3. Do not use the mixer with an external timer.
4. Do not disassemble the device or insert sharp objects into
it.
5. Immediately unplug the mixer in case of bad smells,
sparks or if you see smoke.
6. Place the lid on the glass jar and close it securely. Put the
measuring cup into the hole in the lid and turn it clockwise
Instruction manual
to lock it.
7. Put the glass on the base, to fix it, turn the glass clockwise.
In this way we block the movement.
8. In case any food is obstructed with the blades, make sure
to unplug the mixer from the current, that the rotary switch
is at zero and then proceed to remove the obstructed being
careful not to cut yourself with the blades. Do not use knives
or any sharp utensil as these could damage the components.
9. The exclusive use of this appliance blends food. Do not
put any other ingredient in the blender that is not optimal
for its use.
10. Make sure the blender is empty before moving it as
contents could spill.
11. After each use it must be cleaned and dried for at least
24 hours before being stored.
TURN ON THE MOTOR BASE
SPEED 1
For light use with liquids.
SPEED 2
For a more solid consistency - for mixing liquids and solid foods.
SPEED 0
stop operation
PULSE
For ice crushing and short powerful impulse movements.
▶The switch does not stay fixed in the 'PULSE' setting. You have
After using the blender, always move the switch to the '0' setting
and disconnect the plug from the mains.
▶To remove the glass jar, simply lift it off the motor base. No need to
HELPFUL TIPS
▶For best results when pureeing (cooked solid ingredients), place
▶If you are processing carrots, first cut them into small pieces (1 -
to manually hold the switch in that position or turn it repeatedly
towards 'P'.
twist to remove.
small portions into the glass jar one at a time, rather than a large
amount at one time.
1.5cm).
ref. 07678
