Idiomas disponibles
Idiomas disponibles
Assembly - Attaching the Light Kit
1
Installing the decorative cage
□
Remove one screw (LL) from the black bracket below the fan
motor assembly (E), and loosen but do not remove the other
two screws.
□
Push the decorative cage (G) up to the fan motor assembly
(E) so that the two loosened screw heads fit into the keyhole
slots. Turn the decorative cage (G) clockwise.
□
Re-install the screw (LL) that was removed in the first step.
□
Make sure all the screws are firmly tightened.
2
Attaching the light kit fitter assembly
□
Remove one screw (TT) from the decorative cage (G), and
loosen, but do not remove, the other two screws.
□
Connect the wires from the light kit fitter assembly (H) to
the wires from the fan motor assembly (E) by connecting the
molded adaptor plugs together. Carefully tuck all wires and
splices into the switch cup.
□
Push the light kit fitter assembly (H) up to the decorative
cage (G) so that the two loosened screw heads fit into the
keyhole slots. Turn the light kit fitter assembly (H) clockwise
to secure.
□
Re-install the screw that was removed in the first step.
□
Make sure all the screws are firmly tightened.
G
LL
E
G
H
12
Blue
Black
TT
E
White
