Led Definitions - König Electronic CMP-HOMEPLUG31 Manual De Uso

Installing the homeplugs
Power_line Bridge
Step 1: Connect one powerline
adapter to your ADSL or cable
modem's Ethernet port and plug
the adapter into the nearest power
socket.

LED Definitions

LED
Powerline
Ethernet
POWER
Resetting the homeplug
Reset: Pushing the right button resets the device to the factory default settings. Be careful when pressing the reset
button, please make sure to unplug (remove) the Ethernet cable (RJ-45cable) first, and then press the reset button.
Press the reset button for 3 seconds and wait for the PWR LED to light up again. Do not power off when the device is in
reset mode.
Secure the home plug
The Secure button on the left can auto secure and group the powerline devices, the following is the scenario for the
secure button.
There are two push button trigger state conditions
"Adder state" for a device providing the NMK for an existing AVLN
"Joiner state" for a device that will join an AVLN
Pushing buttons on any two devices results in one of them becoming an "adder" and the other one a "joiner"
ENGLISH
Power_line Bridge
Step 2: Plug in the second powerline
adapter next to your PC and connect
the Ethernet ports
State
ON Powerline network activity.
OFF Search or no Powerline network activity.
ON Ethernet connection is OK.
OFF Data transfer.
Flashing No link to Ethernet.
ON Power on.
OFF Powerline off or failure.
Step 3: Internet access from any
power socket in your home
Description
2
Power_line Bridge