LAVOR Pro GV8,6 Manual De Instrucciones página 21

- Only use a forklift truck or a crane to lift the machine, since it is not perfectly balanced.
- Lift the machine only by means of steel cables or bands duly dimensioned according to the machine weight.
- Lift the machine by means of the safety hooks.
- No foreign operator must stay or pass in the handling area while the operators responsible for the machine transport will have
to keep at a suitable distance to avoid being intercepted by the machine.
- Never make sudden manoeuvres while lifting and handling the machine so that it cannot intercept any people or object present
in the handling area.
- An operator staying outside the handling area will have to follow all the handling activities and signal any possible obstacle the crane
operator cannot see.
- In case of sea transport, it is advisable to protect the various machine parts by covering them with antirust lubricating agents and to
add some bags containing hygroscopic salts to the packaging.
- Once positioned on the truck (or any transport mean) the machine must be braced by ropes, steel cables or wooden wedged duly
dimensioned according to the machine weight.
- The machine must be installed in a place where the best hygrothermometrical conditions are observed for the safety of the operator in
order to reduce the possibility of fatigue to the minimum and to allow the operator to work in the maximum safety conditions.
- The machine installation area will have to be well-ventilated and free from explosive gases.
- The temperature of the machine installation area will have to range between 10°C and 35°C.
View with the machine main references
WARNINGS
Machine installation
WARNINGS
Steam
gun
Control
panel
Gun connection
plug
Pressure
gauge
Boiler drain
cock
Main
switch