Idiomas disponibles
Idiomas disponibles
Installation (continued)
CAUTION: To avoid risk of property damage, follow these instructions closely . Failure
to follow these instructions may result in property damage caused by leaks at these
connections .
Do not use thread seal tape or other sealants on these water line connections .
- Ensure all fittings and end connections are
free of debris .
- Connect the water supply lines (11) (not
supplied) to the faucet water lines (2) using
two wrenches . Do not over tighten .
NOTE: Failing to use two wrenches can damage
the faucet.
- Loop supply lines (11) if they are too long.
- Secure metal nuts (12) of the supply lines
(11) to corresponding supply valves. Tighten
the nuts (12) by hand until they are snug.
Then tighten the nuts (12) with a wrench.
QF44BR
Water Line (2)
(Red Markings)
Supply
Lines (11)
To Hot Water
Supply Valve
Fig . 4
11
13
Fig . 5
6
Water Line (2)
(Blue Markings)
Water
Connectors
1/2" NPS thread
1/2" FIP water
supply line
compatible
(not supplied)
To Cold Water
Supply Valve
12
